Body material: brassStructure: Direct actionType: Normally cosed Seal Material: NBR,EPDM,VITONPort size: 1/8''Port thread: G,NPT,PTOrifice: 2.2mmTemperature: 0°C to 80 °CMedium: water, gas, ste...
Material: Brass
Pressure: Low Pressure
Temperature of Media: High Temperature
Working Pressure: 0-8bar
Product Name: VG10-02833 3 way brass butterfly handle ball strainer valve Size: 1/2" 3/4" 1" Material: Brass Field of Application: Water Working Pressu...
Material: Brass
Pressure: Low Pressure
Temperature of Media: Normal Temperature
Port Size: 1/2'' 3/4'' 1''
Guanli knife gate valve for industrial service applications.The design of the body and seat assures non-clogging shutoff on suspended solids in industries Such as:*Pulp and Paper*Power plants*Chemical plants*Wastewater*Food and Be...
Material: CF8M/CF8
Knife: SS304/SS316
Standard: EN1092/ANSI/JIS 10K/AS4087
Size range: DN50-DN900
Voltage: 220V/380VFeature: High EfficiencyWarranty: 1 YearTheory: Centrifugal PumpStandard or Nonstandard: StandardPackaging Details: STRONG CARTON PACKING WITH EXPORT STANDARDPort: NI...
Structure: Multistage Pump
Usage: Water
Application: Submersible
Power: Electric
Pump InstalLation And AppLicationsIt can be used to transfer clean water or other liquid similar to water in physical and chemical properties. It is suitable for small living water supply, automatic water sprinkler system, small air...
Shaft: Stainless steel welded shafti45# steel
Insulation class: B or F
Protection class: IPX4
Max. Ambient temperature: +40t
Air Release Valves are used to release the air that are formed in pipelines. Steady air release can avoid pressure surge and protect pipe lines from damaging. The Air Release Valve can release air when pipes are filled with water, a...
Application: Water Industrial Usage, Industrial Usage
Pressure: Pn1.0 ~ 2.5MPa
Temperature of Media: -10~120℃
Structure: Air Release
The jet type stainless steel self-priming pump belongs to the small clean water type horizontal single-stage end suction centrifugal pump. The impeller adopts a closed structure design, and reinforced plastic or stainless steel materials ...
flow rate: 1-4m3/h
head: 15-30m
Material: SS304
self priming pump: centrifugal pump
Advantages of Fluoroplastic Magnetic PumpThe fluoroplastic alloy pump is made by fusing polytetrafluoroethylene (F46) and polytetrafluoroethylene (F4) in a certain proportion - fluoroplastic alloy (F50), abbreviated as fluoroplastic...
flow rate: 2-100m3/h
head: 2-50m
Material: fluoroplastic alloy F46/F50
magnetic pump: centrifugal pump
PVHB,CLHB Marine vertical centrifugal pump detachable structurePVHB/CLHB Ship centrifugal pump is suitable for ship ballast cabin bottom pump,cooling pump and fire pump, etc. It can be used to transport seawater, fresh wa...
flow rate: 5-800m3/h
head: 5-80m
Material: bronze,stainless steel, cast iron
seawater pump: fire-fighting pump
Naphtha transfer pumpTwin screw pump is a rotary upright pump, with gears and bearings located externally and not in contact with the conveyed liquid. The pressure, flow rate, temperature, and viscosity of the conveyed liquid have a wide...
flow rate: 1-2000m3/h
pressure: 4MPA
pump material: Cast iron, stainless steel, carbon steel
oil pump: fuel pump
Double suction centrifugal water pumpThe working principle of a double suction pump is based on the basic principle of a centrifugal pumpImpeller design: The impeller of a double suction pump consists of two back-to-back impellers, whic...
flow rate: 5-4000m3/h
head: 10-120m
pump material: cast iron or stainless steel
double suction pump: split case pump
LX Screw /spiral centrifugal pump for slurry pulpLX series spiral centrifugal pump adopts a unique twisted spiral blade, and the entire impeller is composed of a spiral part and a centrifugal part. The former's blades gradually increa...
flow rate: 2-800m3/h
head: 10-50m
pump material: stainless steel
slurry pump: pulp pump
Electric self-priming oil transfer pump fuel diesel kerosene conveyingA self-priming pump can be installed high and dry above the fluid level while automatically removing air from the suction line and filling it with liquid without manual...
flow rate: 2-800m3/h
head: 5-80m
pump material: cast iron pump casing, bronze impeller
oil pump: self priming pump
Gear oil transfer pumpHorizontal, self priming gear pump is used to transfer lubricating oil or other fluids similar to lubricating oil without solid particles and fibers at the temperature below 200 degree celsius and the viscosity of 5 ...
flow rate: 1-100m3/h
pressure: 0.6-2.5MPA
pump material: cast iron or stainless steel
Gear pump: oil pump
Centrifugal pump with Small vacuum storage siphon tankSiphon tank/bucket, also known as vacuum tank /bucket or water diversion tank, utilizes the principle that the vacuum of a sealed container can generate suction force. When used in c...
flow rate: 2-1500m3/h
head: 3-125m
pump material: cast iron or stainless steel
centrifugal pump: transfer pump
RY Hot oil circulating pump for thermal fluids heating systemHorizontal, Single stage single suction cantilever foot support structure, the inlet of pump is axial suction, the outlet is vertical upward. The pump is installed on the ba...
flow rate: 1-500m3/h
head: 15-80m
pump material: cast iron or stainless steel
hot oil pump: thermal oil transfer pump
SS centrifugal pump single stageLight type horizontal stainless steel single stage centrifugal pumpAxial suction, radial dischargePump and motor is directly coupled with the same shaftStainless steel plate stamping, light weightAntic...
flow rate: 2-160m3/h
head: 17-36m
pump material: ANSI304 or ANSI316
booster pump: water pump
Engineering plastic centrifugal pump with open impeller for clear and waste liquidsFlow components which contact with liquids are made of ultra-high-molecular weight polyethylene (UHMWPE). The material has excellent corrosion resis...
flow rate: 2-3000m3/h
head: 20-60m
pump material: UHMWPE, PVDF,F46
sewage pump: chemical pump
PTFE Liner Magnetic chemical pumpNo leakage, corrosion-resistant pumpThe parts which contact with fluids/liquids is for PTFE fluoroplastic, pump outer casing is made of metal /cast iron. Adopt magnetic coupling to drive the pum...
flow rate: 2-100m3/h
head: 3-50m
pump material: F46/FEP/PTFE
centrifugal pump: chemical pump
R-type hot water circulation pump is a single-stage single suction and two-stage single suction cantilever centrifugal pump, suitable for metallurgical, power plants, chemical and other departments, used for conveying high-pressure hot wat...
flow rate: 10-200m3/h
head: 20-80m
pump material: cast iron, cast steel, stainless steel
external cooling water: centrifugal pump
Stainless steel and titanium alloy chemical process pumpsCompact structure: CZ pump has a compact structure, short axial size, small footprint, and convenient installation and maintenance.Strong versatility: This pump is suitable for ...
flow rate: 2-1500m3/h
head: 3-125m
pump material: stainless steel ,duplex stainless steel, titanium alloy
centrifugal pump: chemical pump
YCBCL gear oil pump with magnetic couplingThe pump shaft and inner magnetic rotor of YCBCL type magnetic drive gear pump are completely enclosed by the pump body and isolation sleeve, completely solving the problem of "running, e...
flow rate: 1-80m3/h
pressure: 0.6MPA
pump material: cast iron or stainless steel
gear pump: OIL PUMP
PTFE chemical pump magnetic drive couplingThe anti leakage design of the fluoroplastic magnetic drive pump eliminates the shaft seal and utilizes magnetic coupling to indirectly drive, eliminating the problem of dripping and never poll...
flow rate: 1-100m3/h
head: 3-50m
pump material: fluorine plastic FEP/F46
chemical pump: magnetic pump
centrifugal water pump horizontal split caseMain characteristics of Single stage double suction centrifugal pump is large flow rate and high head of the conveying medium. The impeller is installed inside the pump casing and fastened to t...
flow rate: 80-6000m3/h
head: 10-100m
pump material: cast iron or stainless steel
centrifugal pump: water pump
YCB external meshing circular arc gear oil pumpYCB gear oil pump is a new type of external meshing circular arc gear pump. The gear in the circular arc gear oil pump adopts the tooth profile compounded by advanced circular arc and ot...
flow rate: 0.6-60m3/h
head: 0.3-2.5MPA
pump material: cast iron or stainless steel
gear pump: oil pump
Pneumatic piston pump for high viscous fluids transferApplicationIn the paint, glue, coating, polyurethane coating, automotive coating, building coating, oil transportation, chemical, food, pharmaceutical and other industries widely used...
flow rate: 70LPM
head: 70M
pump material: SS304
Pne: piston pump